Eliminator Lighting Electro 86 - Manual

Electro 86
SPECIFICATIONS:
Model: Electro 86
LEDs: 86 Pcs. (29 Red, 29 Green,
& 28 Blue)
Weight: 2.75lbs./ 1.258kgs.
Size: 6.5” (L) x 7.75” (W) x 6” (H)
Fuse: 1 Amp
Supply Voltage: 120V / 230V
Working Position: Any Safe position
Duty Cycle: None
DMX Channels: 4
Colors: Multiple Colors
Warranty: 1 Year
CAUTION! Please read and
understand these instructions
before installing or operating
this unit.
Operating Instructions:
The Electro 86 has been tested at the fac-
tory, there is no assembly required. The unit
is ready to be plugged into a power outlet.
This unit is a 4 channel DMX intelligent LED
pinspot. It can be run as a stand-alone, static
unit, DMX controlled unit, or in a Master/
Slave configuration. While in Stand Alone or a
Master/Slave configuration, you may choose
between sound active mode, auto run chase,
or static color. For stand-alone mode, Master/
Slave mode, and Master/Slave configuration
settings, see other side.
©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com
Caution! Never open unit when in use.
Always disconnect main power before
replacing fuse. Remember to always
replace with the exact same type fuse.
DMX TRAITS:
CHANNEL 1: RED
CHANNEL 2: GREEN
CHANNEL 3: BLUE
CHANNEL 4: INTENSITY & STROBE SPEED
0 - 189 =
INTENSITY
0% - 100%
190 - 250 STROBE
SLOW - FAST
251 - 255 NO FUNCTION