Eliminator Lighting EF-400 - Manual

SPECIFICATIONS:
Model:
EF 400
Voltage: 120v
Weight: 5Lbs./2.2Kgs.
Size: 8.5”(L) x 6”(W) x 6”(H)
Fuse: 4 Amp
Fluid Type: Eliminator Brand Water
Based Fog Juice
Heater: 400 Watts
Output: 1,500 cubic ft. per minute
Warranty: 1 Year Limited Warranty
EF 400
CAUTION! Please read and
understand these instructions
before installing or operating
this unit.
©Eliminator® Bell Gardens, CA. - www.EliminatorLighting.com
400 WATT FOG MACHINE
Operating Instructions:
The EF 400 is a 400 watt fog machine. It is primarily used to enhance lighting effects. Begin by
removing all of the packing material, especially around the nozzle area. Set the fog machine on a flat,
dry surface. Fill the fog juice reservoir, using Eliminator brand Water Based Fog Juice, only. Attach
the included remote contol to the unit. Plug the unit into a matching power outlet, and press the
power switch to the “On” position. A red L.E.D. will glow on the remote control indicating that the
unit is receiving power. Wait for about 5 minutes for the unit to heat up. After the unit has heated up,
the red L.E.D. will turn off on the remote contol, indicating that the unit is ready. Push the button on
the remote control to emit fog.
1 Year Limited Warranty: Eliminator Lighting warranty is valid from the date of purchase. Our 1 year
limited warranty covers manufacturing defects only. Serial number, place of purchase with dated
valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover items
or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty is only
valid with-in the United States.
SAFETY ISSUES:
NEVER POINT OR AIM A FOG MACHINE TOWARDS PEOPLE OR THEIR CLOTHING. THIS
UNIT EMITS HOT VAPOR AND SHOULD BE USED WITH THE SAME CARE THAT YOU WOULD
OBSERVE WHEN USING AN ELECTRIC IRON.