Eliminator Lighting Micro Swarm LED - Manual

SPECIFICATIONS:
Model: Micro Swarm LED
LED: 4 x 3W Quad LEDs
Weight: 6 lbs./2.5kg
Size: 8”L x 8”W x 7.5”H
Fuse: 2 Amp
Supply Voltage: 100 - 240V 50/60Hz
Power Consumption: 15W
Power Cord Daisy Chain: 29 Fixtures Max.
Working Position: Any Safe position
Duty Cycle: None
Colors: Multiple Colored Lenses
Warranty: 1 Year
CAUTION! Please read and understand these
instructions before installing or operating this
unit.
Operating Instructions:
The Micro Swarm LED is a powerful effect for clubs and dj’s. The Micro Swarm LED creates a dra-
matic cluster of multi-dichroic colored beams. This unit features an external microphone that allows
the beams to be triggered by sound. The Micro Swarm LED’s beams bounce up and down to the
beat of the music. The Micro Swarm LED is ready to be hung or set on the ground in a safe position.
When mounting this unit to truss be sure to use a clamp. Plug the unit in to a standard wall outlet.
After plugging the unit in, the fixture will react to the beat of the music via the sound active external
microphone. The unit has a sensitivity knob on the rear of the unit that makes more or less sensitive
to sound. Turning the knob in clockwise direction will make the unit more sensitive to sound. The
unit requires sound to activate the movement.
Power Cord Daisy Chaining: With this feature you can connect the fixtures to one another using
the IEC input and output sockets. The quantity that can be connected is 29 fixtures maximum. After
29 fixtures you will need to use a new power outlet. They must be the same fixtures. DO NOT mix
fixtures.
©Eliminator® Los Angeles, CA. - wwwEliminatorLighting.com
Caution! Never open unit when in use.
Always disconnect main power before
replacing the fuse. Remember to always
replace with the exact same type of fuse.
1 Year Limited Warranty:
Eliminator Lighting warranty is valid from the date of purchase. Our
1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with
dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover
items or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty
is only valid with-in the United States.
Micro
Swarm LED