Eliminator Lighting Follow Spot 100 LED User Manual
Page 2
©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com
OPERATION:
DMX Mode:
Operating through a DMX controller gives the user the freedom to create their own programs tailored to their
own individual needs. This function also allows you to use your fixtures as spot lights. The Follow Spot 100
LED has 2 DMX channels. See the front page for the DMX traits.
1. This function will allow you to control each individual fixture’s traits with a standard DMX 512 controller.
2. Plug in the fixture via the XLR connections to any standard DMX controller.
3. Press the function select button to activate DMX mode. The DMX LED and the DMX Receive LED should
glow when in DMX mode and the unit is receiving a signal.
Master-Slave Configuration:
This function will allows you to link units together to run in a Master-Slave mode. In Master-Slave operation
one unit will act as the controlling unit and the others will react to the controlling units built-in programs. Any
unit can act as a Master or as a Slave however, only one unit can be programmed to act as the “Master.”
1. Daisy chain your units via the XLR connector on the rear of the unit. Use standard XLR microphone cables
to link your units together. Remember that the Male XLR connector is the input and the Female XLR con
nector is the output. The first unit in the chain (master) will use the female XLR connector only. The last
unit in the chain will use the male XLR connector only.
2. Using the Master unit, choose your desired operating mode and connect the “Slave” unit or units.
1
3
2
4
5
6
Functions:
1. Dimmer Buttons - Used to adjust intensity.
2. Shutter - Blackout or open the shutter
3. DMX Address/Status LED’s - Shows the current DMX address, and fixture status. LED’s show
the fixtures current operating status: DMX LED, DMX Receiving LED, or Manual mode LED.
4. DMX Address Adjustment Buttons - Use these buttons to change the DMX Address.
5. Function Selection Button - Use this button to switch between DMX Mode and Manual Mode.
6. Color Buttons - Choose from 7 different colors plus white.