Eliminator Lighting Electro Panel 192 - Manual

Electro
Panel 192
SPECIFICATIONS:
Model: Electro Panel 192
LEDs: 192 - 64 Red, 64 Green,
& 64 Blue
Weight: 4.6lbs./ 2.1kgs.
Size: 7.12” (H) x 12.41” (W) x
4.5” (D)
Fuse: 7 Amp
Supply Voltage: 120V
Power Cord Daisy Chain: 33 Fixtures Max.
Working Position:
Any Safe position
Duty Cycle: None
DMX Channels: 6 DMX Channel Modes:
1, 2, 3, 4, 6, or 7 DMX
Channels
Colors: Multiple Colors
Warranty: 1 Year
CAUTION! Please read and
understand these instructions
before installing or operating
this unit.
Operating Instructions:
The Electro Panel 192 has been tested at the factory, there is no assembly required. The unit is
ready to be plugged into a power outlet. This unit is a 7 channel DMX intelligent LED par can. It can
be run as a stand-alone, static unit DMX controlled unit, or in a Master/Slave configuration. While
in Stand Alone or a Master/Slave configuration, you can run the auto mode. For stand-alone mode,
and Master/Slave configuration settings, see other side.
Power Cord Daisy Chaining: With this feature you can connect the fixtures to one another using the
IEC input and output sockets. The quantity that can be connected is 33 fixtures maximum. After 33 fix-
tures you will need to use a new power outlet. They must be the same fixtures. DO NOT mix fixtures.
©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com
Caution! Never open unit when in use.
Always disconnect main power before
replacing fuse. Remember to always
replace with the exact same type fuse.
1 Year Limited Warranty:
Eliminator Lighting warranty is valid from the date of purchase. Our
1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with
dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover
items or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty
is only valid with-in the United States.