Eliminator Lighting Electro MH25R - Manual (Page 3)

©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com
MENUS: To access these menus you must press the ESC button twice and then press the UP button until you find the
specific menu you are looking for.
A.001: At this menu you can set the DMX address. Press the Enter button, and the “A” will start flashing. Press the UP or
Down buttons to find your desired address. When you have found your desired address press the Enter button to set it.
r.set (Reset): In this menu you can activate reset function. Using the Up button scroll to “r.set” and press Enter. The unit
will now begin to reset.
r.tilt ( Reverse Tilt): In this menu you can reverse the Tilt function. Using the Up button scroll to “r.tilt” and press Enter.
Press the Up button until “On” is displayed, and press Enter. Now, press ESC. This function works better when you have
two units connected in a Master/Slave setup. Have one unit set to reverse Tilt and the other unit left in normal Tilt.
r.pan (Reverse Pan): In this menu you can reverse the Pan function. Using the Up button scroll to “r.pan” and press En-
ter. Press the Up button until “On” is displayed, and press Enter. Now, press ESC. This function works better when you
have two units connected in a Master/Slave setup. Have one unit set to reverse Pan and the other unit left in normal Pan.
A.Udl (Sound Active): In this menu you can activate Sound Active mode. Using the Up button scroll to “A.Udl” and
press Enter. Press the Up button until “On” is displayed, and press ENTER. It will take about 10 secs. for Sound Activity
to start.
t.ESt (Test Mode/Auto Program): In this menu you can activate the test/auto program mode. Using the Up or Down
button scroll to “t.ESt” and press Enter. “M.od.1” will be displayed, and press ENTER.
d.n.pr (DMX Mode): This menu will let you select which DMX Channel Mode to run. Choose between 12 Channel Mode
(Mode 1) or 8 Channel Mode (Mode 2). Press the Enter button to confirm your selection. Press ESC to exit this menu.
PErS (Display): In this menu you can “flip” the display 180°. Using the Up button scroll to “PErS” and press Enter. “Turn”
should now be displayed. Press the Up button if we wish to “flip” the display, and press Enter.
DMX TRAITS: 8 CHANNELS
CHANNEL 1: PAN 0 - 540
CHANNEL 2: TILT 0 - 270
CHANNEL 3: PAN/TILT SPEED FAST - SLOW
CHANNEL 4: COLOR WHEEL
0 - 4 =
WHITE
5 - 9 = YELLOW
10 - 14 = PINK
15 - 19 = GREEN
20 - 24 = ROSE
25 - 29 = LIGHT BLUE
30 - 34 = YELLOW GREEN
35 - 39 = ORANGE RED
40 - 44 = NAVY BLUE
45 - 127 = COLOR CONTINUE
128 - 191 = RAINBOW COUNTER-CLOCKWISE
192 - 255 = RAINBOW CLOCKWISE ROTATION
CHANNEL 5: GOBO WHEEL
0 - 4 =
SPOT
5 - 9 = GOBO 1
10 - 14 = GOBO 2
15 - 19 = GOBO 3
20 - 24 = GOBO 4
25 - 29 = GOBO 5
30 - 34 = GOBO 6
CHANNEL 5: GOBO WHEEL CONT.
35 - 39 =
GOBO 7
44 - 54 = SPOT
55 - 69 = GOBO 1 SHAKE
70 - 84 = GOBO 2 SHAKE
85 - 99 = GOBO 3 SHAKE
100 - 114 = GOBO 4 SHAKE
115 - 129 = GOBO 5 SHAKE
130 - 144 = GOBO 6 SHAKE
145 - 159 = GOBO 7 SHAKE
160 - 207 = GOBO WHEEL CLOCKWISE ROTATION
SLOW - FAST
208 - 255 = GOBO WHEEL COUNTER-CLOCKWISE
ROTATION SLOW - FAST
CHANNEL 6: GOBO ROTATION
0 - 127 =
GOBO MANUAL ROTATION
128 - 191 = COUNTER-CLOCKWISE ROTATION
192 - 255 = CLOCKWISE ROTATION
CHANNEL 7: STROBING
0 - 39 =
ON
40 - 249 = STROBING SLOW - FAST
250 - 255 = ON
CHANNEL 8: MASTER DIMMER
0 - 255 =
0% - 100%