Ba si c s – l in k m od e, Link mode – elysia alpha compressor User Manual

Page 11

Advertising
background image

11

Link Mode

In link mode, both channels of the alpha compressor can be coupled and operated with the con-
trollers and switches of the left control panel. Please consider the following important notes:

Both sides of the alpha compressor utilize exactly identical electronic modules that could even be
interchanged with each other in principle. This grants a high equality of signal processing in the
left and right channel, which is especially important in stereo mode. Another result is the excellent
isolation of both channels from each other, and the audio quality will not decline because there
are no lossy to and fro signal routings in the circuitry.

As an effect of this design approach, only the control functions of the compressor (marked green
in the figure) are combined in link mode. The left control panel becomes the master, that is the
settings for the left channel are transferred to the right channel – therefore the settings of the
particular controllers on the right side are not relevant in link mode.

At the same time this means that the audio functions of the compressor (marked orange) are not
combined. In linked stereo mode please pay attention to set the controllers and switches for both
EQ, mix and gain sections identically. Otherwise an audible drift between the left and the right
channel might occur.

In linked M/S mode, however, you can set the EQ, mix and gain stages to different values to achieve
certain effects. For example, you can use dissimilar settings of the gain controllers to alter the ste-
reo width (more information on page 24) or you can employ the EQ stages for mid and side signals
separately.

In the signal path, the Soft Clip limiters are located after the M/S decoder. This means that the lim-
iters are completely independent from the operation mode of the alpha compressor – they always
work in stereo. The limiters are also not affected by the status of the link function and therefore
have to be set at the same values every time they are engaged.

BA

SI

C

S

L

in

k

M

od

e

Soft Clip

Gain Reduction

M/S Mode

Active

Channel Link

Mix

Gain

EQ Freq

Hz

SC Gain

dB

SC Freq

EQ Gain

Auto Fast

Feed Forward

On

Auto Fast

x10

On

Transformer

Direct

Compressed

On

Thresh

Attack

Release

Ratio

Soft Clip

Mix

Gain

EQ Freq

SC Gain

dB

EQ Gain

Auto Fast

Feed Forward

On

Auto Fast

x10

On

Transformer

Direct

Compressed

On

Thresh

Attack

ms

Release

ms

Ratio

1:X

Soft Clip

SC Freq

Advertising