Emerson Radio FR23SL - Manual (Page 3)

Control Panel Overview:
▲
- Increase temperature in increments of 1°F (Fahrenheit)
▼ - Decrease temperature in increments of 1°F (Fahrenheit)
☼ - Turn interior lamp on/off.
Unpacking the unit:
1. Remove the exterior and interior packing.
2. Check to be sure you have all the following parts:
a. One (1) wine cellar
b. One (1) owner’s manual
c. Two (2) chrome bottle racks
Finding a good spot for your wine cellar:
• Place your wine cellar on a flat surface that is strong enough to support it when fully
loaded.
• Allow 15 cm (5”) of space on the rear and both sides of the wine cellar to allow proper
ventilation.
• This wine cellar is designed to be free standing only, and should not be recessed or built-
in (fully recessed).
• Do not place heavy objects on top of the unit.
• Do not locate the unit in a moist place.
• Do not locate the wine cellar in direct sunlight.
• The unit’s cooling system operates efficiently with an ambient temperature of 77°F (25°C)
or less.*
* Please note that the interior temperature can be set to between 44°F and 66°F on the control panel. Due to
technological limitations, the wine cellar has the ability to maintain a temperature that is 66°F cooler compared to the
ambient temperature. Therefore, if the ambient temperature is higher than 97°F, the wine cellar might not be able to reach
an interior temperature of 44°F to 66°F as per the control panel settings.
ALWAYS REMOVE ALL BOTTLES BEFORE MOVING THE WINE CELLAR
Installation instructions:
1. Gently place/slide the racks in the wine cellar.
2. Slide the Air Inlet Filter into the guides on the back of the wine cellar
3. Unpack the power cord from the back of the wine cellar
4. Plug the power plug into an exclusive standard 110/120V outlet.