Emerson Radio CR280 - Manual (Page 6)

OPERATION (CONTINUED)
REVERSING THE DOOR POSITION
Caution: To avoid injury to yourself and/or property, we recommend someone assist you during the door reversal process.
2
•Ensure the appliance is unplugged and empty.
•Adjust the two leveling feet to their highest position.
•We recommend you have someone to assist you.
Tools required
•Phillips head screwdriver
•Flathead screwdriver
NOTE:
To take the door off it is necessary to tilt the appliance
on backward. You should rest the appliance something solid
e.g. a chair just below the top panel so you can access the
DO NOT lay the appliance completely flat as this may
damage the coolant system.
4 3
Plastic
cove
r
Remove the plastic cover from door hinge first.
Then unscrew the two screws from top braket and
replace on the other side.
1
bottom of the refrigerator.
Start by removing the bracket from the bottom of the
refrigerator. Unscrew the two screws from the
bottom bracket. Remove the foot from opposite side.
Self-Tapping Screws/Bottom Bracket/Foot
Slide the door down, away from the hinge pin located
on the top of the door.
6