Emerson Radio GP208 - Manual (Page 7)

7
Place a CD on the center spindle,
with the printed label side facing
up. Close the CD Compartment
Door.
4
Slide the FUNCTION switch to
the CD position; the POWER
indicator will light.
1
Press the CD Door OPEN/CLOSE
area to open the CD Compartment
Door.
3
Set the VOLUME control to a low
setting.
2
The CD player will read the table
of contents on the disc and the
total number of tracks will appear
on the CD Display.
5
Press the PLAY/PAUSE (❿ )
button to begin playback on track
1; the PLAY/PAUSE indicator will
light.
6
Adjust the VOLUME ❶ and BASS
BOOST ❷ as desired.
Playback will continue until all the
tracks on the disc have been
played.
2
1
7
After the last track has been
played, the disc stops
automatically and the display
shows the total number of tracks
on the disc.
To stop playback before the disc
ends, press the STOP (■) button.
8
If you are finished listening, press
the CD Door OPEN/CLOSE area ❶
to open the CD Compartment Door.
Remove your disc, close the CD
Compartment Door and slide the
FUNCTION switch ❷ to the POWER
OFF position to turn the unit off.
2
1
9
PLAYING COMPACT DISCS
NORMAL PLAYBACK
NOTES:
• This unit is capable of playing standard CDs or 3” singles; no adapter is required.
• If a disc is inserted incorrectly, dirty, damaged or not present at all, it will not be recognized.
• To prevent damage to the disc, never open the CD door while the disc is rotating. Wait for the disc to
stop before opening the CD door. Never touch the lens when the CD Compartment Door is open.
OPERATING INSTRUCTIONS (CONTINUED)
GP208 O/M.QXD 7/24/02 1:43 PM Page 7