Emerson Radio PD5098 - Manual (Page 11)

10
Programmed playback enables tracks on a disc to be played in any desired order.
Up to 20 tracks can be programmed.
NOTE : Programming can only be done when the player is in Stop mode.
1.) Press the PROGRAM button. “PROGRAM” indicator flashes in the display.
2.) Press the FWD or REV button to select the desired track number..
Example: Track 7.
3.) Press PROGRAM button again to memorize the track.
4.) Repeat steps 2 and 3 until all desired tracks are programmed.
5.) Press the PLAY/PAUSE button to start playback.
“PROGRAM " indicator is flashing in the CD display.
6.) Press STOP button to stop programmed playback. The CD playback stops
but the program remains in the memory.
7.) Press PROGRAM and PLAY/PAUSE buttons to resume programmed
playback.
8.) To clear the program memory, open the CD door, change to Radio function or
switch the power ‘OFF’.
PROGRAMMED PLAYBACK
P R O G R A M
PROGRAM
P R O G R A M
P R O G R A M
PLAY
FWD. SKIP
SEARCH
REV.
PD5098_ib_082003.p65 20/8/2003, 16:57 10