Vertical Communications DX-80 - Manual (Page 51)

Page 48 P7292 DETUG 09/01
password). The attendant extension can set the system mode of operation
using the Evening Mode code or a feature button programmed with the
code for simple one-button operation.
Operation – Change Service Mode
1. At the attendant extension:
1.1. Press the button programmed with the Service Mode feature
code.
Or enter the feature code…
1.2. Press
!63
.
PSWD :_
1.3. Input the attendant extension password.
2. The Service Mode is advanced to the next mode.
3. Repeat until the appropriate mode of service displays.
Page Allow/Deny !/9
You can block one-way page announcements at your extension by dialing
the Page Deny code. The Page Allow/Deny feature does not affect enabled
Background Music.
Operation – Setup
1. When the extension is idle, press
!/9
.
PAGING DENY
2. Press
!/9
again to enable page announcements at your
extension.
PAGING ACCEPT
Pause/Pause Insertion
Pause Insertion is used to generate an intentional delay in dialing on
outgoing outside line calls. You can store a pause or a combination of
pauses in the Speed Dial bins to allow timed access to special services
while allowing you to monitor the progress of the call.
A pause will appear as “P” on the display.
Operation
When storing numbers in speed dial, use the feature code
!70
to insert a pause.