Emerson Radio SB266 - Manual (Page 10)

9
PLAYING COMPACT DISCS
Note: Although this portable CD player can read CD-R and CD-RW discs, in addition
to normal CDs, the playability of CD-R and CD-RW discs may be effected by the
type of software that was used to create the discs, as well as the quality and condition
of the blank media you are using. 100% playability cannot be guaranteed. This is
not an indication of a problem with the player.
NORMAL PLAYBACK
1.) Move the FUNCTION selector to the CD position.
2.) Open the CD door by pressing the OPEN button on the top panel. If you have
not already removed the white transit card from the CD player, please remove
it now.
3.) Place your CD on the center spindle with the printed
label side facing up. Close the CD door. The player
will read the Table of Contents and the display will
show the total number of tracks on the disc. If the
disc is damaged or up side down, display shows
“– –”
4.) Press the CD PLAY/PAUSE button to begin
playback on Track 1. The PLAY Indicator appears
in the display .
• To skip to higher or lower numbered tracks during playback press the FWD
or REV button repeatedly until the desired track number appears in the
display. Playback will begin on the selected track.
• To search rapidly forward or backward during playback to locate a specific
portion of a track, depress and hold the FWD or REV button. The player
will search rapidly forward or backward as long as the buttons are depressed.
Normal speed playback will resume when the buttons are released.
• To Pause momentarily during playback press the
PLAY/PAUSE button again. The sound stops
and the PLAY Indicator flashes, however the disc
continues to spin. To cancel Pause and resume
normal playback press the PLAY/PAUSE
button once more. Normal
playback resumes and the PLAY Indicator stops flashing.
5.) Adjust the VOLUME control as desired.
PD6517_B010703.p65 7/1/2003, 15:23 9