Emerson Radio DTE328 - Manual (Page 26)

24 25
Parental Control
Notes:
Ÿ The password is factory preset to "1234".
To unlock control and change program RATING:
1. Press the SETUP button to enter the Setup Menu.
2. Use the ( < , > ) Navigation buttons to select SYSTEM
SETUP.
3. Use the ( Щ , Ъ ) Navigation buttons to move the cursor to
the PASSWORD box.
4. Press the Number button(s) to enter a 4-Digit factory
preset password "1234" into the player.
5. Press the ENTER button.
After confirming the password by entering the right
password, you can select one of the following 8 rating
levels as desired:
6. Use the ( Щ , Ъ ) Navigation buttons to move the cursor
to the RATING box.
7. Press the ENTER button to confirm your desired level.
8. Select the EXIT SETUP box using the ( < , > , Щ , Ъ )
Navigation buttons and press ENTER to exit and save
setting.
Notes:
Ÿ To change password, enter preset password "1234" and
press ENTER button. Use navigation buttons to go back
to password box and enter your own 4-digit password
and press ENTER button.
Ÿ Default function is disabled on the unit.
If you forget your own password, enter super password
"8200" to unlock control. The password "8200" becomes
your password, unless you change it.
Default
1. Press the SETUP button to enter the Setup Menu.
2. Use the ( < , > ) Navigation buttons to select SYSTEM
SETUP.
3. Use the ( Щ , Ъ ) Navigation buttons to move the cursor to
the DEFAULT box.
4. Use the ( > ) Navigation button to select Restore mode.
RESTORE Mode: Select this mode to reset the player to
factory default setting.
5. Press the ENTER button.
6. Select the EXIT SETUP box using the ( < , > , Щ , Ъ )
Navigation buttons and press ENTER to exit and save
setting.
Note: The password will not be changed back to default.
On Screen Display Language
1. Press the SETUP button to enter the Setup Menu.
2. Use the ( < , > ) Navigation buttons to select LANGUAGE
SETUP.
3. Use the ( Щ , Ъ ) Navigation buttons to move the cursor to
the OSD LANGUAGE box.
4. Use the ( > ) Navigation button followed by the ( Щ , Ъ )
Navigation buttons to select between ENGLISH, GERMAN,
SPANISH and FRENCH on screen display languages.
5. Press the ENTER button.
6. Select the EXIT SETUP box using the ( < , > , Щ , Ъ )
Navigation buttons and press ENTER to exit and save
setting.
Dora DTE328_engP25-34.p65 7/27/05, 9:18 AM 25