Emerson Radio DTE515 - Manual (Page 9)

8
POWER SOURCES (CONTINUED)
AC OPERATION
To operate the unit using AC power, connect an AC adapter (not
included) to an AC outlet having 120V AC, 60Hz only. Plug the small
end into the 4.5V DC jack on the rear of the unit and connect the other
end into the AC outlet. The batteries are automatically disconnected
when the AC adapter is used.
CAUTION: When not using AC power, disconnect the AC adapter
from the wall outlet by pulling the plug (not the cord). Do not touch
the AC adapter with wet hands. Fully insert the plug without
exposing any part of the blade.
AC ADAPTER SPECIFICATIONS
4.5V DC, 500mA
(POSITIVE CENTER)
– +