Emerson Radio DTE516 - Manual (Page 10)

9
POWER SOURCES (CONTINUED)
AC OPERATION
To operate the unit using AC power, connect an AC adapter (not
included) to an AC outlet having 120V AC, 60Hz only. Plug the small
end into the DC 4.5V IN jack on the side of the unit and connect the
other end into the AC outlet. The batteries are automatically
disconnected when the AC adapter is used.
CAUTION: When not using AC power, disconnect the AC adapter
from the wall outlet by pulling the plug (not the cord). Do not touch
the AC adapter with wet hands. Fully insert the plug without
exposing any part of the blade.
AC ADAPTER SPECIFICATIONS
4.5V DC, 500mA
(POSITIVE CENTER)
– +