Stereo headphone jack, Mute button (remote control only) – Emerson Radio ES1065 User Manual

Page 18

Advertising
background image

17

MUTE Button (Remote Control Only)

Press the MUTE button on the front panel or the remote control to shut off the

speakers temporarily, for example, to answer the telephone.

The sound stops and the MUTE indicator appears in the display.

Press the MUTE button again to cancel the mute function and restore the sound.

The MUTE indicator disappears.

The mute function will also be canceled automatically by pressing the VOLUME

or VOLUME + buttons.

Stereo Headphone Jack

This system includes a stereo PHONES jack on the front panel of the main unit.

You may connect a set of stereo headphones, not included, to this jack for private

listening without disturbing others.

The main speakers are automatically shut off when headphones are connected to

the PHONES jack. Make sure that the plug from your headphones is fully inserted

into the headphone jack. If the plug is not fully inserted the sound may be intermittent,

or you may only hear sound from one side of the headphones.

IMPORTANT: To prevent hearing damage always set the volume control to a

low level before you connect the headphones. Then connect the headphones,

put them on, and very gradually increase the volume to a comfortable listening

level. Remember that CDs may contain both very soft and very loud passages.

Adjust the volume to a comfortable level using a louder passage, so that you

always know what the maximum level will be.

ES1065_021705.p65

17/2/2005, 15:41

17

Advertising