Emerson Radio ES27 - Manual (Page 7)

6
7
8
9
10
11
5
4
3
2
1
6
1.) VOLUME UP / DOWN Buttons.
2.) POWER On/Off Button.
3.) CD STOP Button.
4.) CD PLAY / PAUSE Button.
5.) CD Button.
6.) TUNER Button.
7.) Tuning UP / DOWN /
CD Skip Search / Buttons.
8.) MEMORY / PROG.(PROGRAM) Button.
9.) M-UP / REPEAT Button.
10.) BAND Button.
11.) MUTE Button.
REMOTE CONTROL
BATTERY INSTALLATION
Insert 2 pcs ‘AAA’ size (Alkaline)
batteries (not included) into the battery
compartment of the remote controller.
Be sure to observe the polarity markings which are engraved inside the battery
compartment, then close the cover.
BATTERY REPLACEMENT
When the batteries become too weak, the operating distance of the remote
controller is greatly reduced and you will need to replace the batteries.
NOTES:
• To maintain the accuracy and long life of the transmitter, do not press two or
more buttons simultaneously.
• If the remote control is not to be used for a long time, remove the batteries to
prevent possible damage through leaking batteries.
• Do not mix different types of batteries, or old batteries with new ones.
USING THE REMOTE CONTROLLER CORRECTLY
• Point the remote controller at the Remote Sensor.
• The functions of the buttons on the remote control are the same as the
corresponding controls on the main unit.
• When there is a strong ambient light source, the performance of the infrared
Remote Sensor may be degraded, causing unreliable operation.
• The maximum effective distance for remote control operation is about 15 feet.
ES27_ib_0321.p65 21/3/2002, 10:37 6