Emerson Radio MS3106 - Manual (Page 27)

2 6
5.) When the desired disc and track
numbers appear in the display
press the TIME-SET/MEMORY
button again to enter that disc and track in Program Memory number 1. The
track number display returns to “00” and the Program Memory number display
advances to “P – 02”.
6.) Repeat Steps 3, 4, and 5, selecting different disc and track numbers each
time as desired until you have entered up to 60 tracks in the program memory.
CAUTION: If the STOP button is pressed before you finish programming
the player exits the program mode and all previously stored information is
erased.
7.) When you have entered all the
desired tracks in the program
memory press the PLAY/PAUSE
button to begin programmed playback. The tracks that you programmed
will play in the desired order.
After the last programmed track
has played the player stops but
the program remains in the
memory. Press the PLAY/PAUSE to play the programmed sequence again.
The programmed sequence remains in the memory even if you switch to the
TUNER or AUX function, or shut the system ‘Off’.
Clearing The Program Memory
If a disc is playing press the STOP button once to stop playback and then press
the STOP button again to clear the program memory. The program memory will
also be cleared if the CD door is opened.
CD
DISC 3
MEMORY
TRACK
CD
DISC 3
MEMORY
CD
DISC 3
MEMORY
MS3106_010804.p65 8/1/2004, 11:40 26