Emerson Radio BAR322 - Manual (Page 13)

12
Follow the instructions below to connect a VCR to your television using a 75 ohm coaxial cable
(CABLES NOT INCLUDED).
1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of
the VCR.
2. Connect a 75 ohm coaxial cable from the VCR's 75 ohm OUT jack to the ANT jack on the
rear of the TV.
3. Press the SOURCE button until regular TV or CATV appears on the TV screen and press
PLAY on the VCR to watch a tape.
Follow the instructions below to connect a VCR to your television using Audio/Video cables
(CABLES NOT INCLUDED).
1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of
the VCR.
2. Connect the audio cable from the VCR's Audio OUT jack to the TV's Audio IN jack.
Connect the video cable from the VCR's Video OUT jack to the TV's Video IN jack.
3. Press the button until AV appears on the TV screen and press PLAY on the
VCR to watch a tape.
SOURCE
NOTE:
Above are basic connection instructions; for detailed connection instructions for external
units, refer to the external unit's owner's manual.
INCOMING CATV
CABLE
From VCR OUT jack
VCR
INCOMING CATV
CABLE
VCR
AUDIO Cord
VIDEO Cord
From VCR OUT jacks To TV IN jacks
VCR CONNECTIONS