Important safety instructions – Emerson Radio DTE314 User Manual

Page 5

Advertising
background image

4

IMPORTANT SAFETY INSTRUCTIONS

15. Retain Instructions

The safety and operating instructions should be retained for future reference.

16.Water and Moisture

Do not use this product near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub,

in a wet basement, or near a swimming pool and the like.

17. Power Sources

The product should be operated only from the type of power source indicated on the marking label. If

you are not sure of the type of power supply to your home, consult your product dealer or local power

company. For products intended to operate from battery power, or other sources, refer to the operating

instructions.

18. Grounding or Polarization

This product may be equipped with a polarized alternating-current line plug (a plug having one blade

wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit,

contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized

plug. Alternative Warnings -This product is equipped with a three-wire grounding-type plug, a plug having

a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature.

If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the grounding-type plug.

19. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the product, be sure the antenna or cable

system is grounded so as to provide some protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/ NFPA 70, provides information with regard to proper

grounding of the mast and supporting structure, grounding of the lead-in wire to antenna discharge unit,

size of grounding conductors, location of antennadischarge unit, connection to grounding electrodes, and

requ

ir

em

en

ts f

or t

he g

roun

di

ng elect

rode. See f

i

g. A on

page 6

.

20. Lightning

For added protection for this product during a lightning storm, or when it is left unattended and unused

for long periods of time,unplug it from the wall outlet and disconnect the antenna or cable system. This

will prevent damage to the product due to lightning and powerline surges.

21. Power Lines

An outside antenna system should be located in the vicinity of overhead power lines or other electric light

or power circuits, or where it can fall into such power lines or circuits. W hen installing an outside antenna

system, extreme care should be taken to keep from touching such power lines or circuits as contact with

them might be fatal.

22. Overloading

Do not overload wall outlets, extension cords, or integral convenience receptacles as this can

result in a risk of fire or electric shock.

Advertising