Emerson Radio RP1103 - Manual (Page 6)

5
2.) Remove the coiled AC cord form the storage compartment and extend it to its
full length.
3.) Position the cover over the battery compartment and place the cord into the
notch on the battery compartment cover as shown.
4.) Slide the battery cover upward until it snaps back into place.
Connect the AC cord to your 120V 60Hz AC outlet.
Note: When the AC power cord is connected to the outlet the power source
automatically switches to AC. You may leave batteries inside the unit if desired.
There is no battery consumption when the power cord is connected to an AC
outlet.
Caution !!
This radio is designed to operate on normal 120V 60Hz AC power only. Do not
attempt to operate the radio on any other power source. You could cause damage
to the radio that is not covered by your warranty.
This radio uses a polarized AC plug which has
one blade wider than the other. This plug will
only fit into a polarized AC outlet. This is a safety
feature. If the plug will not fit, you may have an
older non-polarized AC outlet. Do not defeat
the safety feature by trying to file the wider
blade, or replacing the plug. Contact an
electrician to replace your outdated outlet.
AC Plug
AC Outlet
RP1103_010505.p65 5/1/2005, 11:49 5