Emerson Radio CKS9005BK - Manual (Page 9)

8
Manual Time Adjustments
Some people like to set their clocks 5 to 10 minutes fast to make sure that they will always be on
time. Even though the SmartSet
®
sets the time by itself, you still have the option of adjusting the
time manually if you wish.
To manually adjust the time display press and hold the TIME button, and press either the SET
or button to adjust the time display ahead or back as desired.
Each press of the SET or button will change the display by one minute. If you hold the
SET button the display will continue to change. The display will change slowly at first, one
minute at a time. If you continue holding the SET or buttons the display will change
rapidly.
NOTE: If you manually adjust the time, your new setting is entered into the SmartSet
®
memory. If
the power is interrupted, the display will return to your new setting, not the original setting, when
the power is restored.
Adjusting The Wake Up Times
Your SmartSet
® clock radio has two separate alarms that can be set and used independently. You
may use the alarms to wake two people at different times, or you may use one alarm for weekdays
and the other for weekend wake up times. The procedure for adjusting the wake up time is the
same for both Alarm 1 and Alarm 2.
1. Press and hold either the ALARM 1 or ALARM 2 setting button.
The display will change from the correct time to the Alarm 1 or Alarm 2 wake up time.
2. While holding the ALARM 1 or ALARM 2 setting button, press either the SET or
button to move the display ahead or back to your desired wake up time.
3. When the desired wake up time appears on the display, release the SET or button.
NOTE: Be sure that you have set the wake up time correctly by observing the AM indicator. If
the AM indicator is ‘On’ the wake up time is “AM”. If the AM indicator is ‘off’, the wake up time
is “PM”.
4. When the desired wake up time (AM or PM) appears on the display, release the ALARM 1 or
ALARM 2 setting button.
Selecting The Alarm Mode
Your SmartSet
®
clock radio allows you to select from among three different alarm operation
modes for either alarm. The alarm modes are:
z Everyday – the alarm will turn on all 7 days.
z Weekdays only – the alarm will only turn on Monday through Friday:
z Weekends only – the alarm will only turn on Saturday and Sunday;
To check the Alarm Mode setting for Alarm 1, press the ALARM 1 setting button. The display will
show the Alarm 1 wake up time and the DAY OF WEEK indicators will show you the alarm mode
which is selected.
z If all 7 indicators are ‘On’, the Everyday mode is selected.
z If only the MON (Monday) through FRI (Friday) indicators are ‘On’,
the Weekdays only mode is selected.
z If only the SAT (Saturday) and SUN (Sunday) indicators are ‘On’,
the Weekends only mode is selected.