Emerson Radio GP808 - Manual (Page 8)

7
OPERATING INSTRUCTIONS
SETTING THE CLOCK
When the unit is plugged in for the first time the clock will show (AM) "12:00" and
the display will flash. The flashing will stop after the clock has been set.
1.) Depress the CLOCK button and the HOUR button together to adjust the clock
to the correct hour, then release the buttons.
Note: Be sure to set the hour correctly for AM or PM. If the AM Indicator is
On', the time displayed is AM. If the AM indicator is 'Off', the time displayed is
PM.
2.) Depress the CLOCK button and the MINUTE button together to adjust the
clock to the correct minute, then release the buttons.
SETTING THE WAKE UP TIME
1.) Depress the ALARM button and the HOUR button together to adjust the clock
display to the correct wake-up hour, then release the buttons. Be sure to set
the wake-up hour correctly for either AM or PM.
2.) Depress the ALARM button and the MINUTE button together to adjust the
clock display to the correct wake-up minute, then release the buttons.
AM indicator
AUTO ‘On’ indicator
GP808_ib072502.p65 25/7/2002, 16:15 7