Emerson Radio SCR120 - Manual (Page 2)

2
Adjusting the DST End Date
3.) Depress and hold both the DATE and ALARM 2 buttons. After 3 seconds the Small display will show the DST ‘end’
month, week, and date.
The first digit will show the month (“10” = October) and the second digit will alternately show the week (“L” = Last
Week) and the date (“28” = October 28th).
This indicates that Daylight Saving Time (DST) will end on the last Sunday in October as usual.
4.) While holding the DATE and ALARM 2 buttons press the UP button once until the display is showing “11” (November)
as the month digit and the week/date digit is alternately flashing “F” (first week) and “4” (November 4 th ).
This indicates that Daylight Saving Time will end on the first Sunday in November, which will be November 4 th in
2007.
Once you make the change for the new Daylight Saving Time (DST) schedule beginning in 2007 your E-Z Set Clock
Radio will automatically adjust for the new schedule until the end of the century (2099).
NOTE: If the built in long life lithium battery is removed or replaced while the radio is not connected to the AC
outlet all internal memory will be erased and the clock will return to its original default settings. After installing a
new battery and resetting the clock to the correct year, date and time it will also be necessary to reset the Daylight
Saving Time (DST) settings as described above.
Printed in China
607-01