CAVS 203G USB - Manual (Page 23)

Press .
Pressing PLAY resumes normal playback.
To pause playback
Each time you press ( or ), the player reverses (or
advances) playback, rapidly changing the playback speed.
Press / during playback of AVI / MP3.
To reverse or advance playback rapidly
Each time you press ZOOM, the magnification is changed.
The 3 time magnification may not work for some AVI / JPEG
files according to their resolutions.
Pressing moves the zoomed position during
playback of JPEG file.
Press ZOOM.
To cancel the zoom function, select the normal size by pressing
ZOOM repeatedly.
To zoom in a picture
19
NOTES
To program files
During playback, you can also press REPEAT to change the
PLAY MODE.
The term “DISC” refers to the USB memory device connected
to the player.
The PLAY MODE feature does not apply to the INX, CD+G
(MP3+MCG), or CD+G (MP3G) karaoke file folders.
To change PLAY MODE.
Opening the disc tray stops playback.
It may take time to show the SMART NAVI display due to
the layer configuration of the files and folders.
The SMART NAVI menu cannot show the file number more
than 500. When the files numbered over 500th are played
back, the player re-counts file number again from 0.
When the screen saver starts, the SMART NAVI display
disappears.
Press STOP.
The SMART NAVI display appears on the TV.
Pressing rotates the picture by 90 clockwise.
Pressing rotates the picture by 90 counterclockwise.
Pressing rotates the picture vertically.
Pressing rotates the picture horizontally.
While the still picture is played back:
To rotate/reflect a still picture
To stop playback
SINGLE SELECTED FILE ONLY
REP - ONE REPEAT SELECTED FILE
FOLDER ALL FILES IN FOLDER
FOLDER REPEAT REPEAT ALL FILES IN FOLDER
DISC SCAN SCAN ALL FILES IN DISC
DISC ALL FILES IN DISC
DISC REPEAT REPEAT ALL FILES IN DISC
Press REPEAT to change the PLAY MODE.
PLAY MODE FUNCTION
Press PROG to change the PLAY MODE to PROGRAM.
Select a file and press ENTER to program. Repeat the
process of selecting a file and pressing ENTER to program.
Press STOP to finish the programming. Press PLAY to start
playback.
USB memory device operations
You can also press / to move by page-up or
page-down in the list.
When you press ENTER, the selected file will begin
playing. During play, press / to change to the next or
previous file.
You can also select a file by entering its file number shown
on the right side of the file name. Input the number and
press ENTER to play.
Press / or / to select the desired file,
then press ENTER.
3
To return to Disc play
Be sure the player is in Stop mode. Press D/U to display
the DISC DRIVE / USB DEV selection menu. Select DISC
DRIVE by pressing / followed by PLAY or ENTER.
The player will become standby for a disc play.