The microdock – E-MU 1616M PCIe User Manual

Page 14

Advertising
background image

3 - CardBus Card & MicroDock
The MicroDock

14

Creative Professional

The MicroDock

The MicroDock connects to the E-MU 02 CardBus card via the EDI cable.

f

The MicroDock is

completely “hot
pluggable”— It’s OK to
plug or unplug the
MicroDock while the
computer is turned on.

It’s a good idea to

mute MicroDock inputs 2
in the PatchMix DSP
mixer when nothing is
plugged in, since the
turntable preamp has a
very high gain (60dB)
and could contribute
extra noise to your mix/
monitor bus.

The MicroDock provides (4) balanced analog inputs, (2) microphone preamp inputs,
(6) balanced line-level analog outputs, (3) stereo 1/8” outputs for connecting powered
computer speakers, (2) MIDI inputs, (2) MIDI outputs, a stereo headphone output, and
a RIAA equalized turntable preamp section which is “normalled” into line input 2L and
2R, 8 channels of ADAT digital input/output, and stereo S/PDIF digital input/output.

The inputs are configured as follows:

The outputs are configured as:

(2)

mono microphone/line inputs (2 inputs)

(2)

stereo pairs of line level inputs (4 inputs)

(1)

stereo pair of S/PDIF/AES digital inputs (2 inputs)

(4)

stereo pairs of ADAT channels on the ADAT optical input (8 inputs)

(1)

RIAA equalized turntable preamp input allows you to connect a turntable without using
an expensive external preamp.

Note: These inputs are automatically disconnected

when plugs are inserted into inputs 2L & 2R.

(2)

MIDI input ports using the supplied breakout cable

(3)

stereo pairs of line level outputs

(1)

stereo pair driving a stereo headphone jack

(Share the same routing as Line Outs 1L/1R)

(1)

stereo pair of S/PDIF/AES digital outputs

(4)

stereo pairs of ADAT channels on the ADAT optical output

(3)

stereo 1/8” computer speaker outputs. These outputs carry the same signals as the 3
stereo line level outputs and are provided as a convenience for connecting computer or
powered speaker systems.

(2)

MIDI output ports using the supplied breakout cable

Line

A

Mic

-15

0

Line -

Mic -

Clip

+50

Line

B

Mic

+65

-15

0

48V

+50
+65

S/PDIF

In

Out

-3
-6

-12
-20

SL

Clip

-3
-6

-12
-20

SL

Off

EDI

In

1L

1R

2L

2R

3L

3R

2L

2R

Out

1L

1R

Phono

Gnd

2L

2R

1

2

Out

48

VDC

+

-

MIDI Cable

3

Advertising