E-MU 0204 USB 2.0 - Manual (Page 15)

E-MU USB Audio Control Panel
0204 USB Owner’s Manual 15
E-MU USB AUDIO CONTROL PANEL
After you have successfully installed the audio drivers, launch the E-MU USB
Audio control panel. The E-MU USB Audio Control Panel is shown below.
• Windows: The E-MU USB Audio control icon will be visible in the Taskbar,
which is normally located in the bottom right of the screen. It can
also be launched from the Start Menu
(All Programs, Creative Professional, E-MU USB Audio Application).
• OS X The E-MU USB Audio control application is located in the Appli-
cations folder . You can also open the application using the
icon on the desktop.
1. Skin
Choose between several different appearances for the control panel.
2. View
Hide the application (Ctrl+H, Windows). You can restore the application by
clicking the E-MU icon
in the System Tray (Windows), or by clicking the
E-MU icon in the Dock (OS X).
3. Help
About E-MU 0204 USB, Audio control, Launch Manual, Check Updates.
4. Device
If you are using more than one E-MU USB Audio device, you can choose
which unit is currently being controlled.
5. Sample Rate
NOTE
Macintosh operation up to
96kHz only at this time –
check www.emu.com for
updates
Allows you to set the system sample rate: 44.1, 48, 88.2, 96, 176.4 or 192 kHz.
6. Headphone Source
The Headphone Source controls whether the headphone output monitors the
MainOut 1/2 or receives its signal from Aux 3/4 of your software application.
The default setting is Main Out 1/2 (Headphones monitor main outputs). Refer
to the following page for more information about this control.
7. USB Speed
Indicates if you are connected to a USB 1.1 or USB 2.0 port on your computer.
1
2 3
4
5
6
7