Envion CA200 - Manual (Page 7)

9 10
Helpful Tips: Remember to clean your Ionic Pro ® Compact ionic
air purifier every month and any time the red CLEAN/FAULT
light comes on or whenever you hear your unit begin to make
excessive noise.
To Clean the Collection Blades
Turn off and unplug your Ionic Pro ® Compact air
purifier. Let the unit rest a minute.
Next, lift off the removable cap and pull up on
the collection blades’ handle to slide the collection
blades out of the top of your Ionic Pro ® ionic
air purifier.
Do not touch the metal blades until after
discharging residual electricity by touching blades
to an electrical ground such as a water pipe or metal
faucet. Wipe away the trapped particles collected
on the three blades with a slightly damp sponge or
cloth. If you use a slightly damp cloth to clean the
blades, it is possible the collection blades will be
completely dry within two to three hours. Always
allow the collection blades to dry thoroughly before
resuming use.
IMPORTANT: To avoid damaging your Ionic Pro ® Compact ionic air purifier, make sure
the collection blades are completely dry and free of all moisture and that your Ionic Pro ®
Compact ionic air purifier is turned off and unplugged before attempting to re-insert the
collection blades.
If you have used soap and water to clean the collection blades, wait at least 24 hours to
ensure that they are thoroughly dry before re-inserting them into your Ionic Pro ® Compact
ionic air purifier.
COLLECTION BLADES
H. CLEANING WIRES
To Clean the Ionizing Wires
The internal ionizing wires need to
be cleaned after every two weeks of use. There
is a Wire Cleaning Mechanism used to clean
the internal ionizing wires which you slide up
and down to scrape off particle residue, (see
Diagram B of the Operating Panel to locate
the Wire Cleaning Mechanism). Lift and
lower the Wire Cleaning Mechanism three or
four times to thoroughly clean the ionizing
wires (see Diagram H).
REMEMBER TO ALWAYS RETURN THE WIRE CLEANING
MECHANISM TO ITS ORIGINAL POSITION BEFORE ATTEMPTING
TO RESUME USE OR THE UNIT WILL NOT FUNCTION
CLEANING & MAINTENANCE CLEANING & MAINTENANCE
CA200_ENV_050511.indd 9-10 5/10/11 10:08 AM