Envion AP200 - Manual (Page 6)

AP200 AP200
mAintenAnce
The Allergy Pro™ professional air purifier is almost maintenance free! Our true HEPA filter lasts up to
twelve months, depending on use and environment conditions. It is recommended to replace the
true HEPA filter every twelve months.
Before replacing the true HEPA filter of your Allergy Pro ™ professional air purifier, turn off and
unplug the unit from the electrical outlet and read all safety instructions and important warnings in
this owner’s manual.
Replacing the True HEPA Filter
1. Make sure unit is turned off and unplugged. Release the inlet grill by pressing on the locking
latch (see diagram of Main Parts).
2. Remove the inlet grill from the unit as shown below.
3 . Grasp the left and right frames of the True HEPA filter through the indentations
on the sides of the filter enclosure and remove the filter.
4 . Insert a new True HEPA filter, then snap the inlet grill back into position.
To Order A Replacement True HEPA Filter
The true HEPA filter should be changed every six months, simply contact our customer service
department at
1.800.875.8577.
The Allergy Pro™ replacement true HEPA filter part number is: TPP200FA
oPerAting the Allergy Pro ™ 200
CONTROlS/SETTINGS:
Power Control – To operate the Allergy Pro ™ 200 air purifier, turn dial clockwise to turn on the air
purifier. Turn dial counter-clockwise to OFF position to turn the unit off.
Fan Speed Control – The Allergy Pro ™ 200 has three different speeds of cleaning, HI, MED and
lOW. Turn the control dial clockwise to your desired speed.
2.
4.
1.
3.
Control Dial
8 9