Configuring port security, Configuring port security -30 – Compaq ProLiant Interconnect Switch User Manual
Page 126
Configuring the GbE Interconnect Switch Using the Web-Based Management Interface
4-30
Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 10:02 AM
Configuring Port Security
When you select Port Security from the Configuration menu, the following screen is
displayed.
The Port Security Settings window is used to set up security for a port or a range of ports.
To set up security for a port or ports:
1. Select the range of ports in the From and To fields.
2. Choose
Enabled in the Admin State field.
3. Type the maximum number of addresses in the Max. Address field.
4. Select
the
Mode that you want, either Permanent or DeleteOnReset.
5. Click
Apply to apply your settings.
NOTE: To save the configuration settings permanently, you must enter them into NVRAM using
the Save Changes option on the Maintenance menu. Refer to the section, “Saving Changes,”
earlier in this chapter.