CloudStor CLOUDSTOR CS-WV/1D - Manual (Page 36)

36
LAN Access - You may enable or disable local network access to shares on the CloudStor here.
Password - This is the login password for the local UI. It’s not related to the Cloud account. To
change the login password for your CloudStor, enter a new password here (twice) and click Save.
The default password is “password”.
Date/Time - You may set the date and time on the CloudStor manually or automatically. If
setting manually, enter a time zone, date, and time. Click Use Local Time to use the time from
your computer. Click [Save] when done.
Network - You may configure the IP address settings on the CloudStor manually or
automatically. Automatically (via DHCP) is recommended for most users. If Manually is selected,
enter the appropriate network settings and click Save. This setting can only be changed when you
are connected to the CloudStor locally as described above.
Storage - You may reconfigure the hard drive settings for the CloudStor here.
Notifications - Enable Email Notification to have your CloudStor automatically send you an email
if errors occur. Click Add to enter the email addresses that notification will be sent to. Choose
which events (Hard Drive Status, Fan Failure, and/or Disk Error) will trigger a notification. Click
Send Test Message to send a sample email to registered addresses, or Save to save your changes
and exit. Note: if your notification emails don’t seem to arrive, check your junk folder!
Maintenance - Clicking Restore restores your CloudStor to its factory default settings. Normally,
this doesn’t affect data stored on the drive. However, you may choose to check Erase data before
clicking Restore, which will erase all data on the drive, restoring the CloudStor to factory-fresh
condition. If you choose to erase data, it may take several hours to complete.