Charmglow GRILL 720-0230 - Manual (Page 7)

ASSEMBLY INSTRUCTIONS
PLEASE READ THE INSTRUCTIONS CAREFULLY AND FOLLOW STEP BY STEP .
Attention: Please lock the caster during the process of installation of the grill.
TOOLS REQUIRED: Philips head screwdriver(not provide),
Crescent wrench(not provide)
Step 1:Assemble two regular casters to the right side panels and caster with brakes on the left side panel as shown figure
below.
Step 2 : Assemble bottom panel to side panels with four (4)
1/4 x 38 mm screws as shown figure below
5