Estes 4605 - Dart User Manual

Page 9

Advertising
background image

9

ADJUSTING FLIGHT TRIMS

During hover, it is normal for the Dart to drift slightly. However, if it moves off in any
direction consistently, quick press (1 or more times) the trim button opposite the
movement until it holds steady.

B

B

A

A

A

B

C

D

E

F

To stop drift, push A

To stop drift, push B

To stop drift,
push C

To stop drift,

push D

To stop spin,
push E

To stop spin,

push F

OFF

A

B

C

D

E

F

FLIGHT MODES

The solid green LED also indicates the controller is in BEGINNER mode. Beginner
mode is the default setting when the controller is turned on.

To adjust the controller to ADVANCED mode (more sensitive controls,) press the
elevator/aileron (right) joystick one time. The LED will begin to fl ash green.

To adjust the controller to EXPERT mode (most sensitive controls,) press the
elevator/aileron (right) joystick one more time. The LED will begin to fl ash orange.
Flip maneuvers can only be performed in expert mode.

To return to the beginner mode, press the elevator/aileron (right) joystick again.
The LED will once again be solid green.

360° AERIAL FLIPS (Expert Mode Only)

Tip: Perform the fl ip while gaining altitude.

OFF

LEFT SIDE FLIP: Quickly push the joystick halfway to the right and then quickly
push the joystick full to the left.

Advertising