Cisco CISCO UNIFIED WIRELESS IP PHONE 7920 User Manual
Page 3
1-3
Cisco Unified Wireless IP Phone 7920 Administration Guide for Cisco Unified CallManager Release 4.2 and 5.0
OL-9356-01
Chapter 1 An Overview of the Cisco Unified Wireless IP Phone 7920
Features Supported on the Cisco Unified Wireless IP Phone 7920
For more information about phone features and how they operate, refer to the
Related Topics
•
Features Supported on the Cisco Unified Wireless IP Phone 7920, page 1-3
•
Overview of Configuring and Installing the Cisco Unified Wireless IP Phone
7920, page 1-8
Features Supported on the Cisco Unified Wireless
IP Phone 7920
The Cisco Unified Wireless IP Phone 7920 functions much like traditional IP
phones allowing you to place and receive telephone calls while connected to the
wireless LAN. In addition to traditional phone features, the Cisco Unified
Wireless IP Phone includes features that enable you to administer and monitor the
phone as a network device.
3
Number keys (0-9)—Use these keys to enter numbers or
characters.
Number keys (2-9)—Press and hold these keys to activate
speed-dial hot keys.
4
Asterisk (*) key—Toggles between Ring and Vibrate mode.
Toggles between upper and lower case.
5
Arrow key—Moves from one function to another. This guide
uses these directional arrows
,
, , or .
6
Power/End key (red)—Turns the phone on or off, silences a
ringing call, or ends a connected call.
7
Pound (#) key—Toggles between locking and unlocking the key
pad.
Allows you to access special characters when you are entering
text.
1
2
ABC
#