Chauvet INTIMIDATOR SCAN LED 300 - Manual (Page 11)

4. Operating Instructions
11 10/25/2010 10:23 AM
Sound-Active
This fixture has a preprogrammed, sound triggered chase.
Access this via the control panel on the front of the fixture. Adjust the microphone sensitivity from
the control panel. Please see the chart below for further explanation.
1. Press <MODE/ESC> until one of the standalone modes appears on the LED screen
(
SLAv, NStS, NAFA, NASL
).
2. Using <UP> and <DOWN>, select
NStS
.
3. Press <ENTER>.
The microphone will only respond to low frequencies (bass).
Service Mode
Hidden Menu Map
This fixture has a hidden menu. The purpose of this menu is to adjust the home position
(electronic adjustment) of the attributes listed below.
M AIN
F UNCTION S ELECTION I NSTRUCTION
P128 000~255 Adjustment for pan
t128 000~255
Adjustment for tilt
G128 000~255 Adjustment for the gobo wheel
r128 000~255
Adjustment for the gobo wheel rotation
C128 000~255 Adjustment for the color wheel
F128 000~255
Adjustment for the focus
Please see the instructions below to access this hidden menu:
1. Press < MODE/ESC > for at least 10 seconds.
2. Using <UP/DOWN>, enter the following pass code: “2323”. Press <UP> to change the
blinking digit in ascending order, and press <DOWN> to move on to the next digit.
3. Press <ENTER>.
This mode will be automatically terminated after 10 seconds of being idol.