COBY TFTV1925 - Manual (Page 21)

15
You can use the unit’s TFT LCD as your computer’s monitor.
Shut down the unit and the computer, connect the VGA jack and PC Audio In jack. See the “Cable 1.
Connection” section.
Turn on the units and press the MODE button to select VGA
2.
System Setup Menu
Various features can be preset through the system menu, please read this section carefully.
Press MENU to display the system menu window.. •
Press the left/right direction button to select the desired menu, press the down direction button or the OK •
button to enter.
While working with the menu,
Press the up/down direction button to select the option. 1.
Press the left/right direction button to adjust. 2.
Press MENU to exit/back up the setup menu. 3.
NOTE: Please see the TV section for menu descriptions.
PC Function
Adjust the PC Screen
Upon switching to the PC mode, the moniter will be automatically regulated for a
proper functioning. If the result is not up to your expectation, please perform the
following steps to adjust the screen manually .
Enter the “Advanced” sub-menu from the SETUP menu, select “Auto” and 1.
press the left/right direction button to adjust the monitor automatically.
Or if you still have problem with the monitor after, adjust “H-Pos”, “V-Pos”, 2.
”Clock“ as well as “Phase” accordingly under the SETUP menu.