EVCO EPH4DXP1CT User manual - Manual (Page 10)

Evco S.p.A. c-pro 3 CLIMA sistema | User manual ver.1.0 | Code 115CP3CSE104
page 10 of 14
1.8 Set-point menu
The c-pro 3 CLIMA sistema gives the final user the possibility to set all weekly automatic time periods work set-points
independently for each zone in a simple and intuitive way via a unique user screen.
To set the work set-points of the time periods it is necessary to go to the "Menu setpoint” (Set-point menu) from the
Zone page using the LEFT or RIGHT navigation keys. The following screen will appear:
To set the set-point just position the cursor on the value to be edited and press ENTER.
Use the UP and DOWN keys to set the desired value and then confirm again using the ENTER key.
The set-points that can be set by the user are:
Economy set-point [W]: Winter Economy period work set-point
Comfort set-point [W]: Winter Comfort period work set-point
Economy set-point [S]: Summer Economy period work set-point
Comfort set-point [S]: Winter Comfort period work set-point
Humid. ECO [S+W]: Economy time period work set-point (Summer + Winter, with regulation active only
in Summer mode)
Humid. COM [S+W]: Comfort time period work set-point (Summer + Winter, with regulation active only
in Summer mode)
1.9 Alarms
Whenever during the display of the Zone Page Vroom shows the flashing ALARM icon, it means that one of the
following alarms blocking the system is in progress:
- MCCT thermal power plant regulator off-line
- Outlet line circulation pump block
- Chiller/heat pump block
- Boiler block
Call the after-sales service immediately to request system maintenance.