EVCO EPK4LHX Hardware manual - Manual (Page 31)

EVCO S.p.A. c-pro 3 NODE kilo | Hardware manual ver. 1.0 | Code 114CP3NKE104
page 31 of 44
Port MB
Slave
- - - - - - - - - - - - MODBUS slave port
Port MB
Master
- - - - - - - - - - - - MODBUS master port
NumReboot parameter available in read-only mode reserved
6.5.7
Configuration parameters of the "USB" sub-menu of the "Networks" menu
The following table shows the meaning of the configuration parameters of the "USB" sub-menu of the "Networks" menu.
PARAM. MIN. MAX. M. U. DEF. DESCRIPTION
USB Status
Device
parameter available in read-only mode reserved
Device
Status Idle
Speed
parameter available in read-only mode reserved
6.5.8
Configuration parameters of the "Password" menu
The following table shows the meaning of the configuration parameters of the "Password" menu.
PARAM. MIN. MAX. M. U. DEF. DESCRIPTION
Level 1:
-32768 32768 - - - 0 value of the level 1 access password
- - - - - - - - - ON
enabling of the level 1 access password
OFF = no password needs to be set to access level 1
ON = it is necessary to set a password to access level 1
Level 2:
-32768 32768 - - - 0 value of the level 2 access password
- - - - - - - - - ON
enabling of the level 2 access password
OFF = no password needs to be set to access level 2
ON = it is necessary to set a password to access level 2
Level 3:
-32768 32768 - - - 0 value of the level 3 access password
- - - - - - - - - ON
enabling of the level 3 access password
OFF = no password needs to be set to access level 3
ON = it is necessary to set a password to access level 3
Level 4: -32768 32768 - - - 0 value of the level 4 access password