Cortelco CENTURION User Manual
Page 7
5
F
EATURES
O
F
Y
OUR
T
ELEPHONE
RD/P Button (Redial/Pause) Your Centurion telephone stores in
memory the last number dialed (31 digits maximum). You can redial
the last number dialed by lifting the handset and pressing the RD/
P button. It must be the first button pressed after lifting the handset
to activate the redial feature.
You can erase the number stored in memory by lifting the
handset and dialing any digit.
To use the Pause feature, press the RD/P button while dialing your
number to insert a two-second pause.
Pushbutton Dial The pushbutton dial is used to dial numbers using
either pulse or tone dialing.
IN-USE Indicator The in-use indicator will light when the handset
is lifted from the cradle.
VOLUME CONTROL Your telephone
complies with the latest FCC part 68
regulations by having a switch in its
handset (see location of switch as shown
in pictorial) that allows the user to
increase the subset's receive volume.
This increased volume should allow
persons with hearing impairments to carry
on normal conversations by adjusting the
receive volume to its proper level.