Casio PX-800 - Manual (Page 22)

E-18
Recording and Play Back
After recording to either of the tracks of a song, you can
record to the other track while listening to playback
what you recorded in the first track.
1. Press the RECORDER button so the PLAY
lamp is lit.
2. Use the + and – buttons to display a song
number (1 to 5).
3.
Press the RECORDER button so the REC
lamp is flashed.
• At this time the L/1 lamp will flash to indicate that the
digital piano is standing by for recording to Track 1.
4. Use the PART/TRACK button to select the
track to which you want to record.
• Make sure that the indicator lamp for the record track
is flashing.
Track 1: L/1 lamp
Track 2: R/2 lamp
Example: Track 1 Selected
5. Select the tone and effects you want to use in
your recording, and set the tempo you want.
• Tone (page E-7)
* After selecting the tone you want, press the TONE/
SONG button one more time so the SONG lamp is
lit.
• Effect (page E-11)
• Tempo (page E-24)
NOTE
• It is a good idea to use a relatively slow tempo when
recording.
• If you want the metronome to sound during recording,
press the METRONOME button.
6. Start playing something on the keyboard.
• Recording will start automatically.
7. To stop recording, press the SONG PLAY/
STOP button again.
• This will cause the REC lamp to go out, and the lamp
above the button of the track to which you recorded
will light.
• To play back the track you just recorded, press the
SONG PLAY/STOP button.
8. After you are finished recording or playing
back, press the RECORDER button so the
PLAY lamp and REC lamp are off.
To record to a specific track of
a specific song
PX800_e.book 18 ページ ２００６年１０月１２日 木曜日 午後１２時５分