Clarion VRX585USB - Manual (Page 58)

60
English
Owner’s manual
59
English
Owner’s manual
11-3 Removing The Main Unit
Keep the hook plate. You cannot remove the main unit without disengaging the hook plate.
(1) When the rear of the main unit has been secured with the method shown in the follow figure
unfasten the special screw.
(2) Remove the outer escutcheon.
(3) Insert the hook plate into the universal mounting bracket, then pull the main unit out by the hook
plate. (Insert both the right and left edges of the hook plate.)
Outer
escutcheon
2-Hook Plate
Unversal mounting bracket Instrument panel
11-2 Main Unit Installation (Universal Mount)
(1) Place the universal mounting bracket into the instrument panel, use a screwdriver to bend each
stopper of the universal mounting bracket inward, then secure the stopper.
(2) Wire as shown in 11-6.
(3) Insert the main unit into the universal mounting bracket until it locks.
(4) Mount the outer escutcheon so that all the hooks are locked.
Console opening dinensions
Some car models require special mounting kits for proper installation. Consult your Clarion dealer
for details.
Fasten the front stopper securely to prevent the main unit from coming loose.
Screw Driver
Hole
Instrument
Panel
Strap
This part is not provided.
Outer escutcheon
Stopper
Unviersal Mounting
Bracket
Hexagonal
bolt
Stopper
183mm
53mm Hole