E-Ware EW-7K126 User Manual
Page 4
4
3.
Place the Raclette Pans on the Lower Plate.
4.
Plug the power cord into a 120 volt A.C. wall outlet. Press the On/Off Switch to the On position
(I).
5.
Preheat the Grill for approximately 5 – 8 minutes.
6.
Add food to the hot Grill Plate as desired. Do not use metal utensils to remove food as this may
damage the Grill Plate coating. Use wooden or plastic utensils.
7.
Raclette Pans can be moved on and off the Lower Plate as food is cooked and served.
NOTE: Hot Raclette Pans should be placed on a heat-resistant surface when removed from
the Grill.
8.
When cooking is complete, press the On/Off Switch to the Off position (0). Remove plug from
wall outlet.
9.
Do not move the appliance until it has completely cooled. Before moving the appliances,
remove the Raclette Pans to prevent them from falling off the Lower Plate.
HELPFUL HINTS
1.
Always preheat the Grill.
2.
Never use metal utensils to place food on or remove food from the Grill Plate.
3.
Never cut food directly on the Grill Plate or in the Raclette Pans.
4.
When using the Raclette Pans on top of the Grill Plate, place gently so they do not scratch the
Grill Plate.
5.
Before preheating the Grill Plate, use a paper towel moistened in 1 tbsp. (15 ml) of good quality
vegetable oil and spread on the cooking surface of the Grill Plate and inside Raclette Pans.
CARE AND CLEANING
1.
Press the On/Off Switch to the Off position (0). Remove plug from wall outlet.
2.
Allow the appliance to cool completely before cleaning.
3.
Remove Grill Plate and Raclette Pans from the appliance. Wash in warm soapy water. Rinse
and dry.
4.
Wipe the Lower Plate/Base with a soft damp cloth.
IMPORTANT NOTES:
•
DO NOT WIPE THE ELEMENT
•
DO NOT USE STEEL WOOL OR ABRASIVE CLEANERS ON ANY PART OF THE
APPLIANCE.
•
DO NOT IMMERSE THE LOWER PLATE/BASE OR THE PLUG IN WATER OR ANY OTHER
LIQUID