Futaba 3PJS - Manual (Page 29)

29
Initial Set-Up
Initial Set-Up
Preparations (Transmitter)
Before setting the transmitter functions, check and set items 1 to 3 below.
(Display when power switch turned on)
When the power switch is turned on, the currently selected model number is dis-
played. Check if this number is the model number you want to set-up. To change the
model number, use the Model Select function (page 44).
Turn on the transmitter power.
The model number is displayed
for about one second.
(Model No.)
The model name is displayed for
about two seconds.
(Model name)
The total timer and voltage dis-
play initial screen is displayed.
(Total timer & voltage display)
1. RF Output Check
If signals are output normally, RF output monitor “RF”
will be displayed on the screen.
If RF is not displayed, check if the transmitter crystal and
RF module are installed.
If the transmitter is abnormal or faulty, contact your
Futaba dealer.