Futaba 6EXAP User Manual

Page 14

Advertising
background image

14

14

3. Push SELECT key to call the screen for selecting channels to control “MAS

MAS” (Master)

mixing. Then select the channel by pushing DATA INPUT lever . Channel 1 (aileron) in this
figure is assigned to the master.

4. Push SELECT key to call the screen for selecting channels to control “SLV

SLV” (Slave) mixing.

Then select the channel by pushing DATA INPUT lever. Channel 4 (rudder) in this figure is
assigned to the slave.

5. Press the SELECT key twice to display the flashing % sign. Use the DATA INPUT lever to

set the percentage of mixing from -100% to +100% (depending on the direction and distance
you wish the slave servo to move).

6. Observe how the controls on the model respond to be certain you have achieved the correct mix and that the throws are as

desired.

Wing Mixing Type Selection

Wing Mixing Type Selection
With the programmable mix (previously described) the user determines the two channels to be mixed. The wing mixing
function is another mix that may be used, but the channels mixed are predetermined. There are three different wing mixing
functions to select from:

FLPR Flaperon mixing

FLPR Flaperon mixing
This function allows the ailerons to be used both as ailerons and

and as flaps. The

flap control dial (CH 6) operates the flap function. To use flaperon mixing both
ailerons must be operated by separate servos.

To activate flaperon mixing:

To activate flaperon mixing:

1. Connect the aileron servo in the right wing to channel 1 (aileron) in the

receiver and connect the aileron servo in the left wing to channel 6 (flaps) in
the receiver.

2. Enter the programming mode. Access the

“FLPR

FLPR” screen with the MODE key.

You cannot set

“Flaperon

Flaperon

mixing when “Elevon

Elevon

mixing has already been set. In order to

enable

“Flaperon

Flaperon

mixing, you first need to cancel “Elevon

Elevon

mixing. However, it is allowed

to use

“Flaperon” and “V-Tail” mixing simultaneously.

*If necessary, use the Servo Reversing
function to achieve the correct direction of
servo throws.

Advertising