Compaq V5100 - Manual (Page 137)

Removal and Replacement Procedures
Maintenance and Service Guide 5–47
5.15 System Board
✎
When replacing the system board, ensure that the following
components are removed from the defective system board and
installed on the replacement system board:
■ Memory modules ( Section 5.6 )
■ Mini Card communications module ( Section 5.7 )
■ RTC battery ( Section 5.8 )
■ Power connector cable ( Section 5.15 )
■ Heat sink ( Section 5.18 )
■ Processor ( Section 5.19 )
■ Fan/heat sink assembly ( Section 5.18 )
■ PC Card assembly ( Section 5.20 )
1. Prepare the computer for disassembly ( Section 5.3 ),
and then remove the following components:
a. Hard drive ( Section 5.4 )
b. Memory/Mini Card module compartment cover
( Section 5.6 )
c. Optical drive ( Section 5.9 )
d. Switch cover ( Section 5.10 )
e. Keyboard ( Section 5.11 )
f. Display assembly ( Section 5.12 )
g. Base enclosure ( Section 5.13 )
2. Turn the top cover right-side up with the front toward you.
System Board Spare Part Number Information
945GM system board 407759-001