Futaba G152 - Manual (Page 2)

RATEINGS
Power supply voltage
Current drain
Dimensions and weight
4.8V shared with receiver (6V for external supply)
Motor: 100mA, Amplifier: 20mA (at 4.8V)
Gyro body: 1.57 x 1.65x 1.69 in. ( 4 0 x 4 2 x 43mm) - 2.86 oz. (80g)
Control amplifier: 1.73 x 2.28 x .63 in.(44 x 58 x 16mm) - 1.61 oz.(45g)
Control box: .94 x 1.34x .59 in.(24x 34 x 15mm) - .54oz.(15g)
CONNECTIONS
The case can be opened by removing these screws.
Connect to receiver
retract or auxiliary channel
(for gyro sensitivity switching)
Connected servo (rudder servo for helicopter)
neutral trimmer (this trimmer is operative even
when the control box power switch is off).
Gyro body
(B) Connector
G132
White
Gyro direction
reverse switch
(B) Connector
(A) Connector
G132
Black
Contra; amplifier
Gyro output trimmer
(0 Connector
(A) Connector
Connect to receiver channel
to be stabilized
(rudder channel for helicopter)
Special 6V five cell Nicad battery
pack connector for motor reg-
ulated power supply. (Insert the
jumper connector when a shared
power supply is used.)
Connect to the servo (rudder servo for helicopter)
The G152 and G132 are interchangeable by
changing the connectors and readjusting the
neutral trimmer.
(D) Connector
G132
Black
(D) Connector
(C) Connector
G132
Jumper connector
Control
box
Gyro power switch