Philips 20PV 184 - Manual (Page 4)

Programming with 'VIDEOPIus+'
All the information required for programming is encoded in the 'VIDEOPIus+' code.
O Press theE SV/V+ [button on the remote control.
Q Enter the entire 'VIDEOPIus+ code'. This code (up to 9 digits) is found next to the start time of a
TV programme in your TV guide.
If you entered an incorrect code number, clear it with the EUMO button.
O If you want to repeat programming at daily or weekly intervals, select the required settings in
the 'DAILY/WEEKLY' line.
'Daily' programming can only be used for recordings to be made from Mondays to Fridays
inclusive.
O After confirming the corresponding data appears on the TV screen.
Selecting a TV channel
Note: If you use VIDEOPIus+ for the first time, the 'PROGRAMME NR.' line appears when you
enterthe VIDEOPIus+ code. Enterthe required programme number.
0 Confirm with the I OK I button.
The data has been stored in a TIMER block.
Please ensure that you loaded a cassette without erase protection.
0
Press the I stamdby 6l button.
How to enter, check or clear a TIMER-block manually___________________
0 Press the I timerqi button.
0
Select a free TIMER block or the TIMER block you want to check or clear.
О
Clear: Press the I I button.
0
Enter/Check: Press the Hor Ebutton to switch between 'DATE'(date),'DW'(daily, weekly),
'PR' (programme number), 'START' (start time) and 'END' (end time).
Press the I. I and the I ▼ I or the I Q-9 I buttons to change the data.
0
To end programming, press the I I button.
0
Press the [ИШШШ] button.
Select the required TV channel (= programme number) with the EH^EH button or the dUIl but­
tons on the remote control.
The selected programme number (e.g.; 'P 01') appears in the upper right corner of the TV screen.
Volume control
You can control the volume level with the I .^+/~ I button.
If you want to mute the sound temporarily (e.g.: during a telephone call), press the EZMISZ] but­
ton on the remote control. When you press it again, the sound returns at the same volume level.
Picture control_____________________________
You can control brightness, contrast, sharpness and colour here.
0 Press the EZMIE! button.
0
Select and confirm the line 'PICTURE'.
o Select and confirm the TV screen setting.
Note: In addition, you can adjust the tint for the playback of cassettes in the NTSC standard.