1 setting the reset peak utilization, 1 setting the reset peak utilization -73 – Cabletron Systems 6000 User Manual
Page 119
System Resources Screen
6E128-26, 6E138-25, 6E129-26 and 6E139-25 User’s Guide
5-73
Current Switch Utilization (Read-only)
Shows how much (percentage of capacity) the 6E12X-26 and 6E13X-25
is currently being used.
Peak Switch Utilization (Read-only)
Shows the peak percentage of maximum switching capacity, since last
reset.
Reset Peak Switch Utilization (Toggle)
Allows the user to reset the Peak Switch Utilization field. The switch may
be set to either YES or NO as described in
. YES resets the
Peak Switch Utilization field to the current system traffic.
5.21.1
Setting the Reset Peak Utilization
To set the Reset Peak Utilization field to YES or NO, proceed as follows:
1.
Use the arrow keys to highlight the Reset Peak Switch Utilization
field.
2.
Press the SPACE bar to select YES or NO.
3.
Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
4.
Press ENTER. The message “SAVED OK” displays.