Mounting the subwoofer, If unit fails to operate properly – Hyundai H-CSP101 User Manual

Page 3

Advertising
background image

3

Mounting the subwoofer

Installation kits are available from your dealer or local stereo shop to help make your installation easy. These kits also give your installation a clean, custom
appearance. Questions about installations methods please consult a professional auto sound dealer/installer for assistance.

· Choose the place of installation for the subwoofer. For most subwoofers stipulated regular places in the automobile approach. In this case you need to

know only assembly depth. Before installation the subwoofer check up its assembly depth.

· Clean any metal shavings from the mounting area and check for areas in which water may enter the subwoofer cavity. Treat the area for water protection

when necessary.

If unit fails to operate properly

· Carefully read the instruction to make sure the unit is being operated properly. Check the following before you take your unit to the local dealer for

repair.

SYMPTOM

POSSIBLE CAUSE

SOLUTION

The volume control regulator set in the
minimal position

Adjust sound level

No sound

The audio cassette receiver is damaged

Take your unit to the local dealer for repair

Acoustic system cables are connected
without observance of polarity (+ or -)

Check to see that all the power and speaker leads
are securely connected

Damage speaker wire or speaker

Replace the speaker or speaker wires

Unnatural sound

The audio cassette receiver is damaged

Take your unit to the local dealer for repair

NOTE: Good ground connections eliminate most electrical noise problems and require tight contact with the metal vehicle chassis. Remove plastics, paint or
rust for good electrical contact.

Advertising